WAF ORFEUSZ206 User Manual page 32

Change Object to Listener
Change Object to Source 1
Change Object to Source 2
Toggle Source Control
On/Off Automove 1
On/Off Automove 2
On/Off Automove 3
On/Off Automove 4
On/Off Automove 5
Start/Stop EQ
Start/Stop Flanger
Start/Stop Vibrato
Start/Stop Chorus
The illustration below shows an example of joystick configuration. This is a regular joystick for gamers,
equipped with 11 buttons (trigger is usually button 1). Actions were assigned to 'only' 8 buttons. This
configuration allows toggling motion control between the 2 sources.
Note that while controlling Source 1, buttons trigger automated trajectories for Source 1 and turn on
effects on channel 1, and while controlling Source 2, buttons trigger actions on Source 2 and channel 2.
Button 4: Change Object
to Source 1
Button 6: On/Off EQ
Button 7: On/Off Flanger
Button 8: On/Off Automove 1
____________________________________________________________________________________
Wrocław Audio Force
Actions assignable to joystick buttons
If you use less than 3 joysticks, you can configure
buttons to switch control to another object.
Trigger an automated trajectory.
Switch effect (and corresponding Spatial Effect) on.
31
Button 5: Change Object
to Source 2
Button 11: On/Off Vibrato
Button 10: On/Off Chorus
Button 9: On/Off Automove 2
ORFEUSZ206
user manual