ReSound Phone Clip+ User Manual page 21

TROUBLESHOOTING GUIDE
SYMPTOM
The mobile phone is ringing
and the light indicator on the
Phone Clip+ does flash, but
no ringing tones will sound in
one or both hearing instru-
ments
The remote user does not
hear my voice clearly
The sound from the hearing
instruments is either to low or
too high
There is no sound in the
hearing instruments although
being in the phone program
40
CAuSE
The Phone Clip+ and hearing
instruments are not within
wireless range
The battery in the hearing in-
struments is so depleted that
it no longer supports audio
streaming
The Phone Clip+ microphone
does not pick up your voice
correctly
The audio input level is not
suitable for listening
The Phone Clip+ and hearing
instruments are not within
wireless range
POSSIBLE REMEDY
Assure that Phone Clip+ and hearing instruments are within
wireless range
replace the battery in the hearing instrument with a new one
Assure that the Phone Clip+ microphone is kept close to
your mouth, and that the Phone Clip+ does not rub against
any clothing during the call
Adjust the volume on the mobile phone until the sound is
suitable, or adjust the volume using the "+" and "-" keys on
the Phone Clip+ until the sound is suitable.
Alternatively (option), use the "+" and "-" keys on the remote
Control for doing this operation
Assure that Phone Clip+ and hearing instruments are within
wireless range
41