ReSound Phone Clip+ User Manual page 20

TROUBLESHOOTING GUIDE
SYMPTOM
The Bluetooth pairing failed
The mobile phone is ringing
but the light indicator on the
Phone Clip+ does not flash,
and no ringing tones will
sound in the hearing instru-
ments
38
CAuSE
The Phone Clip+ left Blue-
tooth pairing mode before
mobile phone completed the
pairing session
The wrong 4-digit PiN code
has been entered
The Phone Clip+ is powered
off
The Phone Clip+ and mobile
phone have not been paired
The Bluetooth connection
between the Phone Clip+
and the mobile phone is lost
POSSIBLE REMEDY
repeat the Bluetooth pairing process, and assure that the
process is completed within 120 seconds after having been
activated in the Phone Clip+
repeat the Bluetooth pairing process and if a PiN code is
requested, enter 0000 (four zeros)
Power on the Phone Clip+
Perform the Bluetooth pairing process and make a Bluetooth
connection between the Phone Clip+ and the mobile phone
Assure that Bluetooth is enabled in the mobile phone and
make a Bluetooth connection between the Phone Clip+ and
the mobile phone again, e.g. by pressing the multifunction
button briefly on the Phone Clip+.
As for any details of the Bluetooth operation of the mobile
phone, please refer to its user guide
39