ReSound Phone Clip+ User Manual page 2

Welcome
Congratulations on your purchase of a Phone Clip+.
Phone Clip+ will allow you to connect your wireless resound
hearing instruments to Bluetooth-enabled mobile phones. This
enables clear and hassle-free phone connectivity, whether you
are at home, in the office or on the move.
The Phone Clip+ also doubles as a basic remote control making
it possible for you to adjust to volume of your hearing instru-
ments and toggle through programs, when you are not talking
on the phone.
You can also chose to mute your hearing instrument microphone
to shut out environmental sound while you are talking on the
phone or when using the Phone Clip+ as a remote control (Verso
wireless family only).
Please read this manual carefully to fully benefit from the Phone
Clip+. Ask your hearing care professional if you have any ques-
tions.
For further information you can also check the http://www.
resound.com/products/accessories web site.
For your safety, carefully read the chapter important information,
on pages 25-31.
FCC id: X26BTB-2
2
Statement:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this de-
vice may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations.
However, there is no guarantee that interference will not occur
in a particular installation. if this equipment does cause harm-
ful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
• reorient or relocate the receiving antenna
• increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
3