NC HT1.0 Original Instructions Manual page 33

LOW FUEL
Be careful not to let the dumper run out of fuel. A low fuel warning light is on the instrument
display will illuminate when the fuel level drops to the minimum recommended level.
Fuel gauge
If the dumper runs out of fuel it will be necessary to bleed the fuel system before the next
engine start.
AIR BLEEDING PROCEDURE
1. Loosen the vent plug on the top of the
Fuel Injection Pump (FIP)
2. Pump fuel using the lever (B)
3. Re-tighten plug (A) when bubbles do
not appear anymore.
Ensure the air vent plug
is tightened after bleeding
or the engine may stop
Fluids & Lubricants
Low fuel light
(A)
(B)
33