2.9 Using the Display Proprietary Telephone
Operation using the function buttons
1.
Press the desired function button on the initial display.
2.
Rotate the Jog Dial until the desired message is at the arrow.
(Refer to "Display feature list" in 2.9.4 Using the KX-T7433, KX-T7436 or KX-T7235 for the
feature messages.)
3.
Press the CALL button, the function button or go off-hook to call the party.
Or press the SEL button to select the desired feature at the arrow or press the function button next
to the desired feature.
4.
Enter parameters if required.
116
Operation