Display Panel; Replacing The Display Hinges; Removing The Display Panel - Dell Inspiron 1090 Service Manual

1 display hinges (2)

Replacing the Display Hinges

1. Follow the instructions in
2. Route the ambient-light sensor cable, touch-screen cable, display cable, and camera cable through the routing guides.
3. Use the alignment posts on the display frame to place the display hinges in position.
4. Replace the four (two on each hinge) screws that secure the display hinges to the display frame.
5. Replace the display bezel (see
6. Replace the hinge caps (see
7. Replace the display assembly (see
CAUTION:
result in damage to the computer.
Display Panel

Removing the Display Panel

1. Follow the instructions in
2. Remove the display assembly (see
3. Remove the hinge caps (see
4. Remove the display bezel (see
5. Remove the display hinges (see
6. Remove the six screws that secure the display panel to the display frame.
7. Note the routing of the display cable and remove it from the routing guide.
More user manuals on
2 screws (4)
Before You Begin.
Replacing the Display
Replacing the Hinge Caps).
Replacing the Display
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
Before You Begin.
Removing the Display
Removing the Hinge Caps).
Removing the Display
Removing the Display
ManualsBase.com
Bezel).
Assembly).
Assembly).
Bezel).
Hinges).