Replacing The Display Assembly - Dell Inspiron 1090 Service Manual

1 ambient light-sensor cable connector
3 display cable
11. Remove the two screws that secure the display assembly to the computer base.
12. Lift the display assembly off the computer base.
1 display assembly

Replacing the Display Assembly

1. Follow the instructions in
2. Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.
3. Route the ambient-light sensor cable, touch-screen cable, display cable, and camera cable through the routing guides.
4. Connect the ambient-light sensor cable, touch-screen cable, display cable, and camera cable to their connectors on the system board.
5. Route the Mini-Card antenna cables through the routing guides.
6. Connect the appropriate antenna cables to the Mini-Cards(s) on your computer (see
7. Replace the memory module (see
8. Replace the battery (see
9. Replace the palm-rest assembly (see
More user manuals on
2 touch-screen cable connector
4 camera-cable connector
2 screws (2)
Before You Begin.
Replacing the Memory
Replacing the Battery).
Replacing the Palm-Rest
ManualsBase.com
Replacing the
Module).
Assembly).
Mini-Card(s)).