Connecting To A Computer - Sony VPL-HS50 Operating Instructions Manual

Connecting to a Computer

Rear of the projector
P /C VIDEO S VIDEO
R R
INPUT
: Video signal flow
Tip
Set "Input A Signal Sel." in the Setup
signal does not appear properly, set it to "Computer."
Note
If you set your computer, such as a notebook type, to output the signal to both your
computer's display and an external monitor, the picture of the external monitor may not
appear properly. Set your computer to output the signal to only the external monitor.
For details, refer to the computer's operating instructions supplied with your computer.
16
Step 2: Connecting the Projector
INPUT A
HD D-sub 15-pin cable (not supplied)
to monitor output
menu to "Auto" or "Computer." If the input
Computer