Installation Menu - Sony VPL-HS50 Operating Instructions Manual

Installation Menu

The Installation menu is used for changing the installation settings.
Picture
Signal
Function
Installation
Setup
Information
Item
V Keystone
Image Flip
Background
Illumination
High Altitude Mode
Network Setting (VPL-
HS51 only)
42
Installation Menu
V Keystone : 0
Image Flip : O f f
Background : Blue
Illumination : On
High Altitude Mode : O f f
Network Setting
Sel: Set: Back: Exit:
Description
Corrects the vertical trapezoidal distortion of the picture.
Sets a lower value (– direction) when the bottom of the trapezoid is
longer than the top (
the top of the trapezoid is longer than the bottom (
Flips the picture on the screen horizontally and/or vertically.
Off: The picture does not flip.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Selects the background color of the screen when no signal is input.
You can select "Black" or "Blue."
Turns on the illumination on the top panel of the projector when set
to On. It turns off when set to Off.
Off: Use this setting when using the projector at normal altitudes.
On: Use this setting when using the projector at an altitude of 1,500
m or higher.
Displays settings in the network configuration of this projector.
Notes
• You cannot change the network settings with this projector. For
information on networking, consult with qualified Sony personnel.
• Be sure to set "Standby Mode" in the Function menu to "Standard"
when you use the network function. (1 page 41)
). Sets a higher value (+ direction) when
).