Download Print this page

Table Of Contents - Craftsman 315.108470 Operator's Manual

7-1/4 in. double insulated
Hide thumbs

Advertisement

■ Table of Contents ............................................................................................................................................... 2

■ General Safety Rules .....................................................................................................................................2-3
■ Specific Safety Rules and/or Symbols ............................................................................................................3-6
■ Features .........................................................................................................................................................7-8
■ Assembly ........................................................................................................................................................8-9
■ Operation ....................................................................................................................................................10-17
■ Maintenance ...............................................................................................................................................17-18
■ Accessories ..................................................................................................................................................... 18
■ Exploded View and Repair Parts List .........................................................................................................20-21
■ Parts Ordering / Service ................................................................................................................................... 22
WARNING:
Read and understand all instruc-
tions. Failure to follow all instructions listed
below may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
■ Keep your work area clean and well lit. Clut-
tered benches and dark areas invite accidents.
■ Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
may create sparks which may ignite the dust or
fumes.
■ Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
Electrical Safety
■ Double insulated tools are equipped with a
polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a
polarized outlet. Do not change the plug in any
way. Double insulation
the three-wire grounded power cord and grounded
power supply system.
■ Avoid body contact with grounded surfaces,
such as pipes, radiators, ranges, and refrigera-
tors. There is an increased risk of electric shock if
your body is grounded.
■ Don't expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
■ Do not abuse the cord. Never use the cord to
TABLE OF CONTENTS
GENERAL SAFETY RULES
eliminates the need for
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges, or
moving parts. Replace damaged cords immedi-
ately. Damaged cords increase the risk of electric
shock.
■ When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W".
These cords are rated for outdoor use and reduce
the risk of electric shock.
Personal Safety
■ Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use tool while tired or under the influ-
ence of drugs, alcohol, or medication. A mo-
ment of inattention while operating power tools
may result in serious personal injury.
■ Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught
in moving parts.
■ Avoid accidental starting. Be sure switch is off
before plugging in. Carrying tools with your
finger on the switch or plugging in tools that have
the switch on, invites accidents.
■ Remove adjusting keys or wrenches before
turning the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
■ Do not overreach. Keep proper footing and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
■ Use safety equipment. Always wear eye protec-
tion. Dust mask, nonskid safety shoes, hard hat,
or hearing protection must be used for appropriate
conditions.
2

Advertisement

loading

  Related Manuals for Craftsman 315.108470