Download Print this page

Accessories - Craftsman 315.108470 Operator's Manual

7-1/4 in. double insulated
Hide thumbs

Advertisement

DOUBLE INSULATION
Double insulation is a concept in safety in electric
power tools, which eliminates the need for the usual
three-wire grounded power cord. All exposed metal
parts are isolated from the internal metal motor
components with protecting insulation. Double
insulated tools do not need to be grounded.
IMPORTANT
Servicing of a tool with double insulation requires
extreme care and knowledge of the system and
should be performed only by a qualified service
technician. For service, we suggest you return the tool
to your nearest Sears Service Center for repair.
Always use original factory replacement parts when
servicing.
EXTENSION CORDS
The use of any extension cord will cause some loss of
power. To keep the loss to a minimum and to prevent
tool overheating, use an extension cord that is heavy
enough to carry the current the tool will draw.
The following recommended accessories are currently available at Sears Retail Stores.
■ 7-1/4 in.
40 Tooth General Purpose Cut-Off Blade
■ 7-1/4 in.
35 Tooth Master Combination Blade
■ 7-1/4 in.
200 Tooth Plywood Blade
■ 7-1/4 in.
18 Tooth Carbide Blade
■ 7-1/4 in.
18 Tooth Mach ll Silver Series Carbide Blade
■ 7-1/4 in.
24 Tooth Mach ll Silver Series Carbide Blade
■ 7-1/4 in.
24 Tooth Combination Carbide Blade
Rip Guide
Dust Nozzle Kit – Part No. 982829-001
WARNING:
The use of attachments or accessories not listed might be hazardous.
WARRANTY
FULL ONE YEAR WARRANTY ON CRAFTSMAN CIRCULAR SAW
If this
Circular Saw fails to give complete satisfaction within one year from the date of purchase,
RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES,
and Sears will repair it, free of charge.
If this
Circular Saw is used for commercial or rental purposes, this warranty applies for only 90
days from the date of purchase.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
MAINTENANCE
A wire gage size (A.W.G.) of at least 16 is recom-
mended for an extension cord 100 feet or less in
length. When working outdoors, use an extension
cord that is suitable for outdoor use. The cord's jacket
will be marked WA.
CAUTION:
cutting area and position the cord so that it will
not get caught on lumber, tools, etc., during
cutting operation.
WARNING:
use. If damaged replace immediately. Never use
tool with a damaged cord since touching the
damaged area could cause electrical shock
resulting in serious injury.
Extension cords suitable for use with your saw are
available at your nearest Sears Retail Store.

ACCESSORIES

18
Keep extension cords away from the
Check extension cords before each

Advertisement

loading

  Related Manuals for Craftsman 315.108470