Table of Contents
Advertisement
4 X 2 Drive System - (Steel Bed)
13.13. If it is necessary to remove the bearing, use a
bearing puller. See Figure 13.13.
Gear Puller
Figure 13.13
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
14.
14.1. If brake drum has not already been removed
14.2. Remove the brake drum. See Figure 14.2.
Brake Drum
14.3. Remove the R-shaped clips that hold the brake
70
TRANSAXLE: AXLE TUBES
from the axle tube, perform the following steps:
Figure 14.2
NOTE: On transaxles that have never had the
brake drum removed, there may be a speed nut
on one of the studs. The speed nut is there for
factory assembly and shipping purposes. It can
be removed and discarded.
actuator to the brake shoes, and remove the
actuator. See Figure 14.3.
Brake Shoes
R-shaped clips
Figure 14.3
Speed Nut
Advertisement
Table of Contents
