Paslode IM350+ General Safety Instructions page 16

BATTERY and BATTERY CHARGER:
■
The charging system is designed to be used in covered
■
places. Do not expose it to rain or to excessive humidity.
Arrange the charging system so as not to walk on the
■
cable or catch it.
Do not use the system with a damaged cable or plug.
■
Replace them immediately.
To avoid electrocution risks, disconnect the power supply
■
adapter before cleaning the terminals and contacts. Use a
dry cloth.
The adapter, the charger and the battery are designed to
■
operate together. Do not use the charging system for other
batteries or battery-operated tools.
Do not put 'Impulse' batteries on charge on chargers other
■
than 'Impulse' chargers.
Do not short-circuit a battery. A high current could be
■
produced causing overheating and destruction of the
battery.
Do not put a battery on charge if its temperature is less
■
than 5°C or greater than 40°C.
Do not put metal objects in contact with the battery's
■
terminals.
Do not pierce or open the battery's cells.
■
Before using the battery charging
system, read the instructions and
precautions indicated on the AC/
DC adapter, the charger and the
battery carefully.
Do not store batteries at a temperature greater than
■
50°C.
Do not incinerate batteries.
■
Do not use a battery charger which heats up excessively
■
or gives off fumes when connected. Disconnect the charger
immediately.
Only charge one battery at a time on a charger.
■
Batteries must be recycled or taken to appropriate places
■
(collection containers according to local provisions).
4