Table of Contents
Advertisement
OK
ERROR Otherwise.
Inquiries :
#CID?
Retrieves the current Caller ID mode from the modem.
#CID=?
Returns the mode capabilities of the modem in a list with each element separated by commas.
Formatted Form Reporting
The modem presents the data in the <tag>=<value> pair format as described in the table below.Spaces are
present on both sides of the equal sign.
TAG
DATE
TIME
NMBR
NAME
MESG
Notes:
1. The modem does not present any Caller ID information if the DCE detects a checksum error in
the Caller ID packet.
2. In the event of an unrecognized data tag, the modem will present the data in ASCII hex
numbers following the MESG tag.
Example of Formatted Form Reporting
1. The following example illustrates the standard Caller ID message packet.
RING
DATE = 0321
TIME = 1405
NMBR = 504551234
NAME = A N OTHER
RING
RING
2. The following example illustrates the case where the tag of the packet is not recognized by the
modem.
RING
n=0 or 2.
Description
DATE=MMDD where MM is the month number(01 to 12) and DD is the day
number (01..31).
TIME=HHMM where HH is the hour number (00 to 23) and MM is the minute
number (00 to 59).
NMBR=<number> or P or O where <number> is the telephone number of the
caller,where P indicates that the calling number information is not available
since the originating caller has requested private service, and where O
indicates that the calling number information is not available or out of service
at the calling location.
NAME=<listing name> where <listing name> is the subscription name.
MESG=<data tag><length of message><data><checksum> in printable ASII
hex numbers. This tag indicates a data item not listed above. The message is
only possible for Multiple Message Format.
Advertisement
Table of Contents
