Table of Contents
Advertisement
TROUBLESHOOTING:
No Video
•
Check the status of the Link LEDs, and check if the HD device is working normally.
•
Check the HDMI lead is undamaged and is plugged into the correct socket.
•
Check that the correct HDMI output has been selected from the HD device's menu
and that the HDMI lead is plugged into the correct output socket.
•
Check that the correct HDMI input has been selected from the TV menu and that
the HDMI lead is plugged into the input socket selected.
•
Make sure that it is the Receiver that is connected to the HDTV display, and the
Transmitter that is connected to your HD device.
Power LED
•
Make sure the power is connected, and check the power adaptor output 5V/3A DC.
OFF
Transmitter
•
Check the HD device is powered on.
Video LED
•
Make sure the Transmitter is powered on. Make sure the HD device is on, connected
OFF
to the HDMI socket and outputting a supported resolution (1080p, 1080i, 720p,
720i, 576p, 576i, 480p).
•
The WHITE LED will switch OFF if an unsupported video signal is output.
Receiver
•
Part of the system is not properly connected or the signal received is not of good
Video LED is
enough quality/strength.
ON
•
Make sure the HD display is connected, switched ON and set to the right channel/
input (e.g. HDMI channel).
•
Check the HDMI lead is undamaged and is plugged into the correct socket.
Transmitter /
•
Make sure the Transmitter and Receiver are not positioned too far apart. Move them
Receiver Link
closer together to check minimum effective range.
LED Flashes
•
Make sure the HD device is switched ON and had been connected to Transmitter
Bad Picture
•
Make sure the HDMI leads used are undamaged and that you can get a good picture
when the source is connected directly to the display with an HDMI lead.
•
Make sure nothing is touching or blocking the signal to the built in antennas.
•
Move Transmitter and Receiver closer together Restart the HD device or reconnect
the HDMI lead.
Bad Audio/
•
Make sure that the source is outputting supported audio formats If the audio signal
No Audio
drops out, Restart the audio source and reconnect the HDMI lead Make sure there is
no 5.8GHz wireless phone within 50cm of the Receiver.
•
Some phones use substandard transmission schemes
Other Issues/
•
If any other issue occurs of if the above issues persist, try switching OFF both
Unresolved
Transmitter and Receiver and repeating the link set-up process
Issues
8
Advertisement
Table of Contents
