Troubleshooting - JVC KD-LX100 Instructions Manual

TROUBLESHOOTING 98,
What appears to be trouble is not always serious Check
the following points before calling a service
centre
Symptoms
l
CD cannot be played back
l
CD sound is sometimes
interrupted
Causes
CD is inserted upside down
You are driving on rough roads
CD is scratched
Connections are incorrect
l
Sound cannot be heard from The volume level is set to the
the speakers minimum level
Connections are incorrect
l
SSM (Strong-station
Sequential Memory)
automatic preset does not
work
Signals are too weak
l
Static noise while listening to The antenna is not connected
the radio firmly
l
"NO DISC" appears on the No CD is in the magazine
display
l
"RESET 8" appears on the
display
l
"RESET 1" -"RESET 7"
appears on the display
This unit is not connected to a
CD changer correctly
l
"EJECT ERR" appears on the The CD player may function
display and CD cannot be
incorrectly
ejected
l
No message appears on the
display but CD cannot be
ejected
l
This unit does not work at all
The built-in microcomputer may
l
The CD changer does not function incorrectly due to noise,
work at all etc
Stop CD play while driving on
rough roads
Change the CD
Check the cords and
connections
Adjust it to the optimum level
Check the cords and
connections
Store stations manually
Connect the antenna firmly
Insert CD
Connect this unit and the CD
changer correctly and press the
reset button of the CD changer
Press the reset button of the
CD changer
Press and hold w V for
more than 5 seconds
While holding A FFI, press the
reset button Release the reset
button, then release A w
(Be careful not to drop the CD
when ejecting )
Press the reset button on the
front panel (See page 2 )
27