Assigning Names To The Sources - JVC KD-LX100 Instructions Manual

Assigning names to the
sources
You can assign names to station frequencies and
CDs After assigning a name, it will appear on
the display when you select the source
Sources
Maximum number of the
characters
Station frequencies Up to 10 characters (up to
30 station frequencies
including both FM and AM)
CDs * and
Up to 32 characters (up to
CD changer *
40 discs)
* You cannot assign a name to a CD Text
7 Select a source you want to assign a
5 Repeat steps 3 and 4 until you finish
name to.
inputting the name.
2 Press and hold SEL (select) for more
than 2 seconds while pressing DISP.
When you select a station frequency as the
source:
When you select the CD as the source:
3
Select a character
About the available characters, see below
4 Move the cursor to the next (or
previous) character position.
6 Press the button while the last
selected character is flashing
The input name is stored in memory
To erase the input characters
Insert spaces using the same procedure
described above
Available characters
Notes
l
When YOU try to assign a name to the 41st disc,
"NAME FULL" appears on the display (In this
case, delete unwanted names before assignment )
l
When the CD changer is connected, you can assign
names to CDs in the CD changeK These names can
also be shown on the display if you insert the CDs
in this unit
22