JVC KD-LX100 Instructions Manual page 10

Manual weset
You can preset up to 6 stations in each band (FM1 ,
FM2, FM3 and AM) manually
Ex Storing an FM station of 88 3 MHz into the
preset number 1 of the FM1 band
1 Select the band (FMl)
q
Press SOURCE to
select the tuner as the
source
q
Press BAND repeatedly
to select the FM1 band
2 Tune into a station of 88.3 MHz
Press h ))I to tune into
stations of higher frequencies
Press I44 v to tune into
",., '\
stations of lower frequencies
'.
3
Press and hold the number button (in
this example, 1) for more than 2
seconds
Band number and "MEMO" appear
alternately for a while
,
4 Repeat the above procedure to store
other stations into other preset
numbers.
Notes
l
A previouslv preset station is erased wherl n new station
is stored in the same preset number:
l
Preset stations are erased when the power
s~cpplv
to the
memory circuit is interrupted (for example, during bntterv
replacement) If this occurs, preset the station7 ngnin
Tunina into a ureset station
You can easily tune into a preset station
Remember that you must store stations first If you
have not stored them yet, see "Storing stations in
memory" on pages 9 and 10
7 Select the band
%
0 Press SOURCE to select
tuner as the source
q
If necessary, press
BAND repeatedly to
select the band
Each time you press the button, the band
changes as follows
FMl- FM2 - FM3 -
AM
2 Select the number (l-6) for the preset
station you want.
When using this unit in an area other than
North or South America:
You need to change the AM/FM channel
intervals See "To change the AM/FM
channel intervals - AREA" on page 19
10