Download  Print this page

Attaching The Viewfinder; Attaching The Supplied Viewfinder; Adjusting The Viewfinder Position - Sony PMW-400K Operating Instructions Manual

Hide thumbs

Advertisement

Attaching the Viewfinder

CAUTION
When the viewfinder is attached, do not leave the
camcorder with the eyepiece facing the sun. Direct
sunlight can enter through the eyepiece, be focused in the
viewfinder and cause fire.

Attaching the Supplied Viewfinder

Note
When attaching the viewfinder, make notes of the
following points.
• Be sure to power off the camcorder before coupling the
viewfinder connector to the camcorder's VF connector
(26-pin). If you make this connection when the
camcorder power is on, the viewfinder may not
function properly.
• Couple the viewfinder connector firmly to the
camcorder's VF connector (26-pin). If the coupling is
loose, noise may appear on the video or the tally
indicator may not operate properly.
1
1 Loosen the viewfinder left-to-right
positioning ring, 2 attach the
viewfinder to the viewfinder fitting
shoe, and 3 tighten the viewfinder left-
to-right positioning ring.
Viewfinder left-to-
right positioning
ring
30
Attaching the Viewfinder
Stopper
2
Couple the viewfinder connector to the
VF connector (26-pin).
VF connector (26-pin)
Detaching the viewfinder
You can detach the viewfinder by following the
attaching procedure in reverse order, but there is
an additional action to take: when detaching the
viewfinder from the fitting shoe, pull up the
stopper (see page 30).

Adjusting the Viewfinder Position

To adjust the viewfinder left-to-right position,
loosen the left-to-right positioning ring, and to
adjust the front-to-back position, loosen the front-
to-back positioning knob.
Viewfinder left-to-right positioning ring
Viewfinder front-to-back positioning knob
Upward

Advertisement

Table of Contents

   Related Manuals for Sony PMW-400K

This manual is also suitable for:

Pmw-400l

Comments to this Manuals

Symbols: 0
Latest comments: