Sony PMW-400K Operating Instructions Manual page 120

OPERATION
Menu items
Marker
Makes settings related
to marker display in the
viewfinder screen.
120 Menu List
Sub-item Settings
Setting On/Off
Center Marker 1/2/3/4/Off
Center H Position –40 to 0 to 40
Center V Position –40 to 0 to 40
Safety Zone On/Off
Safety Area 80%/90%/92.5%/95%
Aspect Marker Line/Mask/Off
Aspect Select 15:9/14:9/13:9/4:3/
1.66:1/1.85:1/2.35:1/
2.4:1
Aspect Mask 0% to 30% to 90% (10%
step)
User Box On/Off
Description
Turns all markers on or off.
Note
When Marker is assigned to the
ASSIGN. 2 switch, this setting is
disabled.
When the center marker is
displayed, selects the type. Select
"Off" if you do not want to display
the marker.
Note
When "Safety Zone," "User Box,"
and "Guide Frame" are set to "On,"
this setting cannot be turned on.
Specifies the horizontal position of
the center marker.
Specifies the vertical position of the
center marker.
Turns the safety zone display on or
off.
Note
When "Center Marker," "User Box,"
and "Guide Frame" are set to "On,"
this setting cannot be turned on.
Selects the safety zone range.
When an aspect marker is to be
displayed, selects the display
method. Select "Off" if you do not
want to display the marker.
Line: Show as white lines.
Mask: Display by lowering the
video signal level of areas
outside the marker range.
Selects the aspect ratio of the
marker.
When "Aspect Marker" is set to
"Mask," specifies the video signal
level of areas outside the marker
range as a percentage value relative
to the video signal level of areas
inside the marker range.
Turns the box cursor display on or
off.
Note
When "Center Marker," "Safety
Zone," and "Guide Frame" are set to
"On," this setting cannot be turned
on.