Sony PMW-400K Operating Instructions Manual page 115

OPERATION
Menu items Sub-item
Format Country
Specifies the
camcorder's operating
mode and recording
format.
Format Media Media(A)
Executes a media
format.
Media(B)
Input/Output In FAT mode
Makes settings related Output& i.LINK
to I/O signals.
In UDF/exFAT mode
Output
23.98P Output
Source Select
i.LINK I/O
SDI Output
HDMI Output
Settings
NTSC Area/NTSC(J)
Area/PAL Area
Execute/Cancel
Execute/Cancel
HD&HDV/SD&HDV/
SD&DV/480P/576P
HD/SD/480P/576P
PsF/Pull Down
Camera/i.LINK
Enable/Disable
On/Off
On/Off
Description
Selects the area of use (execute by
selecting "Execute").
Initializes the SxS memory card in
slot A (execute by selecting
"Execute").
Initializes the SxS memory card in
slot B (execute by selecting
"Execute").
Selects the signals output from the
video connectors and the i.LINK
(HDV/DV) connector.
When the HD/SD setting is SD,
"SD&DV" or "SD" is selected.
Selects whether to use progressive
output (PsF) or pulldown output
(Pull Down) when the video format
is in the following modes.
exFAT/HD mode
XAVC-I 1920×1080/23.98P
XAVC-I 1280×720/23.98P
UDF/HD mode
HD422 50 1920×1080/23.98P
HQ 1920×1080/23.98P
HD422 50 720/23.98P
HQ 1280×720/23.98P
FAT/HD mode
HQ 1920×1080/23.98P
HQ 1440×1080/23.98P
Selects whether to use the video
camera picture (Camera) or the
signal input from the i.LINK (HDV/
DV) connector (i.LINK) as the video
input source.
Selects whether to enable or disable
input and output of signals via the
i.LINK (HDV/DV) connector.
When "Enable" is selected, you can
execute auto black balance
adjustment during i.LINK output.
(When this setting is set to "Enable,"
The flashband reduce function is set
to "Off.")
Turns on or off the output of signals
from the two HD/SD SDI OUT
connectors.
When the camcorder is connected to
a computer via USB, set to "Off."
Turns on or off the output of signals
from the HDMI connector.
Menu List 115