Output Signals And Operation Restrictions When A Camcorder System Is; Configured (In Hd Mode Only) - Sony PMW-400K Operating Instructions Manual

Output Signals and Operation Restrictions When a
Camcorder System is Configured (in HD Mode Only)
The table below shows output signals from the camcorder and operation restrictions to the camcorder when
it is connected with a camera adaptor and camera control unit to configure a shooting and recording system.
When the camcorder is equipped with the CA-FB70/CA-TX70 HD Camera Adaptor, full HD signals
complying with the HD-SDI standard are transferred to the camera adaptor.
Note
When configuring a camcorder system with a camera adaptor and camera control unit, install the optional CBK-CE01 50
Pin Interface and Digital Extender and set "OPERATION" > "Format" > "HD/SD" to "HD" in the setup menu.
Settings of Rec Format and
System Frequency under
OPERATION >Format in
the setup menu
XAVC-I 1920/59.94i
XAVC-L50 1920/59.94i
XAVC-L35 1920/59.94i
XAVC-L25 1920/59.94i
HD422 1920/59.94i
HQ1920/59.94i
HQ1440/59.94i
SP1440/59.94i
XAVC-I 1920/29.97P
XAVC-L50 1920/29.97P
XAVC-L35 1920/29.97P
HD422 1920/29.97P
HQ1920/29.97P
HQ1440/29.97P
SP1440/23.98P
XAVC-I 1920/23.98P
XAVC-L50 1920/23.98P
XAVC-L35 1920/23.98P
HD422 1920/23.98P
a)
HQ1920/23.98P
b)
HQ1920/23.98P
a)
HQ1440/23.98P
b)
HQ1440/23.98P
Output Signals and Operation Restrictions When a Camcorder System is Configured (in HD Mode Only)
SDI outputs to the camera
adaptor
1920×1080/59.94i
1920×1080/29.97PsF
1920×1080/59.94i (2-3PD)
Output disabled
Output disabled
1920×1080/59.94i (2-3PD) 1920×1080/59.94i
System format of Operation restrictions to
the camera adaptor the camcorder
and camera control
Genlock
unit
1920×1080/59.94i Available
Not supported Unavailable Unavailable
Not supported Unavailable Unavailable
Available
Return video
display
Available
Unavailable
193