Table of Contents
Advertisement
SETUP
1.
Press until desired feature
is heard (see list at right).
CHANGE
2.
Press until desired selec-
tion is heard.
3.
SETUP
Press to set selection and
move to next menu option.
Or
(
Stop)
Play/
Press to set selection and
exit setup.
NOTES:
1. To temporarily disable the
message alert tone, press any
answering machine key (
TIME/
SET, SETUP, CHANGE, REC/
MEMO, PLAY/STOP, DELETE,
and
) on the base.
REPEAT
SKIP
This turns off the audio message
alert tone but the number in the
message window will continue
to flash as a reminder that there
are unreviewed messages on the
answering system. The message
alert tone will be re-activated
with the next incoming message.
2. To switch off the message
alert tone for all incoming mes-
sages, read the section on disa-
bling the message alert function
in the list on the right.
3. Press and hold
to
CHANGE
advance the remote access code
number by 10.
Answering system operation
Changing feature options
You can change how the answering system operates.
Press
repeatedly to hear each feature. Press
SETUP
when you hear the feature you want to
CHANGE
modify.
Feature options
System announces:
"Announcement. Press
PLAY or press RECORD.
To continue setup, press
SETUP."
Options: [record announce-
ment]
"Remote access code. To
change the setting press
CHANGE."
Options: [enter 2-digit code]
19
"Message alert. To change
the setting press CHANGE."
Options: On / Off
"Announcement only,
record no messages. To
change the setting press
CHANGE."
Options: On / Off
"Call screening. To change
the setting press CHANGE."
Options: On / Off
"Number of rings. To
change the setting press
CHANGE."
Options: 2 / 4 / 6 /Toll saver
35
35
(Default settings underlined)
Feature description:
Press REC
to record your
/MEMO
outgoing announcement (see page
33). Press
STOP to stop
PLAY/
recording.
Enter a two-digit number (10-99) for
remote access from another phone
(see page 39).
When the answering system is turned
on (the
light is lit)
ANSWER ON/OFF
and the message alert function is acti-
vated, any new incoming message will
increase the flashing number in the
message window by one, and a beep
tone will sound every ten seconds as
a reminder that there are unreviewed
messages on the answering system.
When on, callers hear an announce-
ment but cannot leave messages (see
page 34).
When on, you can hear callers leave
messages, or answer the call.
Choose number of rings before the
system answers a call. When toll saver
is active, the system answers after
two rings if you have new messages,
and after four rings if you have no new
messages.
Advertisement
Table of Contents
