Advanced Setting - Samsung SRN-470D User Manual

Advanced Setting

[menu]  ▼  <network>  ►  <Connection mode>  [enTer]  ▲▼◄►  <Advanced> 
▲▼◄►  [enTer]
• Protocol Type : Select the protocol type between TCP and UDP.
If you select UDP, the items of Port(UDP) and Unicast/Multicast will be active.
`
If set it to TCP, the Port(TCP) item will be active.
`
• Port (TCP) : Enter the connectable port number. Initially, <554> is set.
- TCP : It has better stability and lower speed when compared to UDP, and recommended for internet
environments.
• Port (UDP) : Initially, <8000~8159> is set. It increases / decreases by 160.
- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area
network (LAN) environments.
• Unicast/Multicast : Select one between Unicast and Multicast.
If selected Multicast, Multicast IP and TTL are activated.
- Unicast : Transfers data (UDP, TCP) individually to each connecting client.
- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the
network.
• Multicast IP : User can directly input.
• TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.
• Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.
• Send SSL : Select this option to send SSL.
English _77