Electrical System Maintenance; Charging The Battery; Removing The Battery - Toro TimeCutter SS 4225 Operator's Manual

A
B
C
D
Figure 36
Electrical System
Maintenance
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.

Charging the Battery

Removing the Battery

WARNING
Battery terminals or metal tools could short against
metal machine components causing sparks. Sparks
can cause the battery gasses to explode, resulting
in personal injury.
• When removing or installing the battery, do not
allow the battery terminals to touch any metal
parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
1. Park the machine on a level surface and disengage the
g027753
blade-control switch.
2. Move the motion-control levers outward to the P
position, shut off the engine, remove the key, and
wait for all moving parts to stop before leaving the
operating position.
3. Raise the seat to access the battery.
4. Disconnect the negative (black) ground cable from the
battery post
Note: Retain all fasteners.
33
WARNING
CALIFORNIA
Proposition 65 Warning
Wash hands after handling.
(Figure 37).
ARK