75 St Eu Fuses; Microphone Hanger - Cobra 75 ST EU Operating Instructions Manual

75 ST EU Fuses

Replacing the
IN-LINE
FUSE HOLDER
In-Line Fuse
Note
The radio is protected with a 2 fuse
To replace the in-line fuse; push the ends of the holder
system in the event that the user
together then turn counter-clockwise and pull the two
decides not to use the cigarette
sections apart.
lighter plug.
Caution
For continued protection against fire
hazard, replace with same type 2A,
250V fuses.
Replacing the Fuse
To replace the fuse in the cigarette light plug (CLP), rotate the
metal tip of the CLP to access the fuse.
Note
Be sure not to lose the retaining spring within
There is a retaining spring in the holder.
the CLP used for tension connectivity.
CIGARETTE
LIGHTER PLUG
6
2A, 250V FUSE
IN-LINE
FUSE HOLDER
IN-LINE IN-LINE
FUSE HOLDER FUSE FUSE HOLDER
METAL TIP
RETAINING
2A, 250V FUSE
SPRING
Installing Microphone Hanger
1 Hold microphone hanger in location desired for mounting.
Make certain that nothing will interfere with the hanger's
installation.
2 Mark the location for the two mounting screws
(screws included).
3 Drill and mount microphone hanger.
Installation
Installing
Microphone
Hanger
7