Lighting Burner; To Turn Off Gas; Adjust Blower Speed - Monessen Hearth IDV SERIES IDV380NVC Installation And Operating Instructions Manual

IDV380/IDV490 Fireplace Insert
MAiN BuRNeR SWitCh
The "ON/OFF" switch for the main burner can be found on the right side of insert surround. This
switch allows you to turn on and to turn off the main burner without using the gas valve knob.
Make sure the button is in the "ON" position to light the main burner. Figure 33
liGhtiNG the BuRNeR
Depress and turn the knob counterclockwise
than four (4) seconds for the burner to ignite.
PilOt POSitiON
Depress and turn knob to pilot position to keep burner off while maintaining the pilot light. Figure
35
O N
F
O F
Figure 33 -
On/Off Switch
Depress and turn knob clockwise
position. Figure 36
ADjuStiNG BlOWeR SPeeD
The internal blower helps transfer heat from heater into room.
It will not turn on until heater is up to temperature (approxi-
mately 10 minutes after starting).
To turn blower off, turn knob all the way counterclockwise
. One click clockwise turns blower to high speed.
Turning knob clockwise
speed of blower. Figure 37
6

liGhtiNG BuRNeR

P I L
Figure 34 - On Position

tO tuRN OFF GAS

FP1937
to "OFF"
control knob on
from high position decreases
to the "ON" position. Figure 34. It will take less
O T
Figure 36 -
Off Position
Figure 37 -
Blower Knob
OPeRAtiNG iNStRuCtiONS
P I L
O T
Figure 35 - Pilot Position
P I L
O T
FP1939
fan control knob
57D0016