Important Electrical Information - Everlast 1654701 Owner's Manual

Important Electrical Information

WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord
●
away from any moving part of the treadmill including the elevation mechanism and transport wheels.
NEVER remove any cover without first disconnecting AC power.
●
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such
●
conditions are not covered under your warranty. If you suspect the voltage is low, contact your local
power company or a licensed electrician for proper testing. See Diagnosis Guide, page 23.
NEVER expose this treadmill to rain or moisture. This product is NOT designed for use outdoors, near a
●
pool or spa, or in any other high humidity environment.
This product must be grounded. If the treadmill should malfunction or breakdown, grounding provides a
path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with
a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded. Do not modify the plug provided with the product if it will
not fit the outlet; have a proper outlet installed by a qualified electrician.
NEVER operate this treadmill without reading and completely understanding the results of any operational
●
change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired work level on the
●
computer console and release the adjustment key. The computer will obey the command gradually.
NEVER use your treadmill during an electrical storm. Surges may occur in your household power supply that
●
could damage treadmill components.
Use caution while participating in other activities while walking on your treadmill, such as watching television,
●
reading, etc. These distractions may cause you to lose balance or stray from walking in the center of the belt;
which may result in serious injury.
NEVER mount or dismount the treadmill while the belt is moving. Our treadmills start with at a very low
●
speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow
acceleration is proper after you have learned to operate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
●
Do not use excessive pressure on console control keys. They are precision set to function properly with little
finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are
not functioning properly with normal pressure, contact your dealer.
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
4
Dyaco Canada Inc. 2014