Advertisement
Instruction manual
Recording
Recording for the first time with the DPM 9360:
into the DPM and that the batteries have been inserted correctly. Unlock the DPM by moving the center
part of the 4-position switch forward to the stop position.
Record standby:
2.
Press the REC button =
record standby mode.
LED blinks red.
5.
Stopping recording
:
Press the REC button = stop mode
Ending the dictation
Press the EOL button (6):
if the 4-position switch is in the stop position and something has already been recorded to the file!
For short pauses:
Move the 4-position switch to the stop position. - Continuing recording: Move the 4-position switch back to the playback position.
EOL
(End-of-Letter)
The function of the EOL button is as follows:
• Pressing the EOL button once marks the current file as finished.The file is closed and assigned the
EOL symbol:
.
After closing the file, the Pocket Memo automatically creates a new, empty file.
Inserting Text
Inserting text into the current file:
playback. Press the INS/OVR button followed by the REC button and move the 4-position switch back to the
playback position. Dictate your addition. LED is green.
Inserting text into a saved audio file:
file selection and access the file, press the jog shuttle. Unlock it by pressing on the EOL button, then follow
the steps as described above.
To end the process:
Either move the 4-position switch to the fast-forward/reverse position or press
the REC button and don´t forget to end the insertion mode by pressing the INS/OVR button again.
(Press the EOL button again.)
Quick Reference
(Recording: LED steady red)
(Inserting: LED green)
(EOL button:
6.
back side)
When you are finished with the dictation and do not wish to make any further changes.This only functions
Move the playback cursor to the desired location in the file. Stop the
Select the corresponding file using the jog shuttle.To confirm the
Check whether a memory card has been inserted
MIC
Hold the DPM approximately 10 centimetres
away from your mouth. Speak clearly.
Record Start:
3.
Move the 4-position switch to the
playback position. LED steady red.
1.
4.
4-position switch
to the stop position.
4-position switch in the stop position.
back
Advertisement
