Multi Board - Winnov VIDEUM User Manual

Multi Board

Winnov 2.7 Software enables you to plug into your Windows
NT 4.0 or Windows 2000 system several Videum AV/VO PCI
cards and control them .
Useful tips :
1. Installation
On Windows 2000, PnP drivers must be installed separately for
each card.
2. Choice of the board
Each card will get a number so that you know which one you
are using.
Videum Capture allows you to select a card in the Video
Properties dialog box in the Device list box.
While using the Videum Status application, you can select
directly the card
3. Configure your cards
Default settings configured using Videum Configure are
applied to all boards in the system.
The Information tab of the Videum Configure application
allows you to select the card.
You can use the Videum Mixer application on the board #0, for
the other ones, use Windows mixer. The Videum Board
number can be selected from the Windows mixer using the
Options menu, select Properties, then select the board with
Mixer Device list.
4. Use your boards
Most video applcations, such as NetShow and NetMeeting
allow the audio and video device to be selected, refer to your
application's user guide.
Some applications such as Adobe Premier 5.0, do not
support multiple boards in the same system. Contact your
application vendor for updates.
15