Winnov VIDEUM User Manual page 14

Windows 2000 Plug N Play Software Installation :
Windows
NOTE: When a system is upgraded from NT4 to Windows 2000,
the Videum drivers will no longer function. You must install PlugAndPlay
drivers for Windows 2000. It is recommended that you uninstall the NT4
Videum drivers before installing the PlugAndPlay drivers.
If the card has not yet been inserted, then insert the card,
and point to the Windows 2000 directory of the Videum CD
when asked for drivers.
If the Videum card appears in the Device Manager under
"Sound, video, and game controllers" , then you can "Update
driver" from the Device Manager and point to the Videum
CD when it asks for drivers. If Videum appears under
"Unknown devices" , then delete it, click Refresh, and point to
the Videum CD when it asks for drivers. For a PCMCIA card,
point to the INF file in the Windows 2000 directory on the CD.
After the PlugAndPlay install has been completed (and the
device appears as operational in the Device Manager), you can
install the Winnov Videum applications, if you want. To do this,
just run the Setup.exe program.
In all cases, we recommend that you reboot after the drivers
are installed to hook in the audio drivers. The PlugAndPlay
install only needs to be done once. Future driver updates can
be accomplished by running the Setup.exe program.
14