Software Installation - Winnov VIDEUM User Manual

Software Installation

Plug-and-Play boards:
These products are automatically detected by Windows 95, 98
and 2000. With Windows NT 4.0 Plug-and-Play boards need to
be installed manually, since NT 4.0 does not support Plug-and-
Play.
•
all VideumCam products (ISA, PCI and PC Card)
•
all Videum VO and AV PCI boards
•
Videum AV ISA PnP board
Non Plug-and-Play boards:
These boards are not detected by Windows 95 and 98.
•
Videum VO (ISA)
•
Videum AV (ISA)
Windows 95/98 Software Installation for Plug-
and-Play boards (from CD-ROM)
1. ISA and PCI cards: install the card and start the computer
PC Card: start the computer and plug in the PC Card.
Windows automatically detects the hardware.
2. Click Next
3. Click Search for best driver for your device and click Next
4. Mark CD-ROM drive and click Next
Windows now locates the new driver on CD-ROM. PC Card:
MediaPlug PCMCIA Adapter. Click Next.
5. Windows may ask you to insert Winnov Video Drivers.
Click Browse and select the Win95 directory on CD-ROM.
Windows now copies the files and builds the driver infor-
mation database.
6. Click Finish. Question: Install video capture drivers
now? Click Yes. InstallShield® now installs the Videum
software. Click Next. Software License Agreement. Click
12