ENGLISH
Advanced Recording
Snap Shot (SCM53 only)
With the SNAP SHOT feature, your camcorder functions like a regular film camera, allowing you to take
single still pictures.
-
The SNAP SHOT function operates in the CAMERA mode.
1. Set the power switch to CAMERA mode and
LOCK/STANDBY switch to STANDBY mode.
2. Aim the camcorder at the image you want to record
and press the SNAP SHOT button.
Be careful not to shake your camcorder
to avoid blurring the image.
3. After the SNAP SHOT button has been pressed, your camcorder will record the image
for 6 seconds, then automatically return to STANDBY mode.
You can check the remaining time for SNAP SHOT recording by looking at the time displayed on
the screen.
To stop SNAP SHOT recording, press
the SNAP SHOT button again.
Note:
While the SNAP SHOT feature is activated, you can not activate any other functions.
48
CAMERA
STANDBY