Digital Zoom works in CAMERAmode only.
Zooms more than 22x are performed digitally.
The picture quality deteriorates as you go toward the "T" side.
We recommend that you use the DIS (SCM53) feature with the DIGITAL zoom for
picture stability. (see page 35)
1. Set the power switch to CAMERA mode and LOCK/STANDBY switch to STANDBY mode.
2. Make sure that the DIGITALZOOM feature is on. (see page 34)
3. When you move the ZOOM lever to the "T" side, the picture will
be enlarged within 22x minimum to 440x maximum ZOOM.
This is the DIGITAL ZOOM boundary.
shows the digital zoom area
shows the optical zoom area
4. If you do not want to use the DIGITAL ZOOM, set the DIGITALZOOM function to OFF
in the MENU list. (see page 34)