Playing back a Tape
Various Functions in PLAYER mode
To view a STILL picture (Playback pause)
-
Press
(PLAY/STILL) button during playback.
-
To resume playback, press
Note: Your camcorder will automatically stop if it is left for more
than 5 minutes in STILL mode without operation in order to
prevent tape and head-drum wear.
To locate a scene (picture search)
-
Press
(FF) or
To resume normal playback, release the buttons.
Zero RETURN
The ZERO RETURN function works in STOP of PLAYER mode.
You can Fast Forward or Rewind to 0:00:00 automatically.
1. Set the power switch to PLAYER mode.
Make sure that STOP is displayed.
2. Press the ZERO RETURN button.
Z.RETURN is displayed.
FF or REW works automatically.
Note: The ZERO RETURN button does not work when
the TAPE COUNTER reads 0:00:00.
Notes:
Press the C/RESET button at the start of the cassette or the required sequence.
When you wish to find this point on the tape again,
press Z.RTN button when playback is stopped.
(PLAY/STILL) button again.
(REW) buttons during playback.
REW
FF
ENGLISH
55