Advanced Recording
PIP (Picture-in Picture; SCM53 only)
The PIP (Picture-in-Picture) feature works in combination with the DIGITAL ZOOM function by using a
small, superimposed screen to show an image that is wider than the image being recorded. This shoul
help you to get a more clear idea of what you are recording.
-
The PIP function works in CAMERAmode only.
1. Set the power switch to CAMERAmode and
LOCK/STANDBY switch to STANDBYmode.
2. Turn on DIGITAL ZOOM. (see page 33)
3. Press the PIPbutton. A small screen will appear.
4. Check the picture you are recording on the PIP screen,
and turn the Zoom button to "T" position to activate the
DIGITAL ZOOM mode.
Start recording by pressing the START/STOP button.
5. Press the PIPbutton again.
The small screen disappears.
Note: When you use PIP function, the PIP screen will be on the recording.
CAMERA
ENGLISH
STANDBY
47