Sharp LC-13SH1E Service Manual page 9

5. Remove the 2 lock screws from the main PWB and undo the hooks a. Detach the chassis frame, together with its
terminals, from the main PWB.
6. Remove the 2 lock screws from the sub PWB and undo the hooks b, c and d. Detach the chassis frame together
with its terminals, from the sub PWB.
7. Remove the 2 lock screws from the R/C, LED PWB and take out the R/C, LED PWB.
8. Remove the 2 lock screws from the operation panel (top cover), and detach the operation panel (top cover).
9. Remove the 3 lock screws from the operation PWB, and detach the operation PWB.
10. Remove the 4 lock screws each from the right and left speakers and take out both the speakers.
Main PWB
Chassis Frame
5
d
a
c
b
Speaker (R)
R/C,LED PWB
10
9
6
Sub PWB
8
Operation panel
(Top Cover)
Operation
PWB
9
Speaker (L)
10
7
LC-13SH1E
LC-15SH1E