Sharp LC-13SH1E Service Manual page 11

» Precautions at the time of the side B(back) service of main and sub unit.
1. Remove only SC1203 of the FFC for connection between Main unit (SC1203) and LCD panel, and connect the
extended cable (QCNW-A553WJZZ) for service.
2. Remove only SC1202 of the FFC for connection between Main unit (SC1202) and LCD panel, and connect the
extended cable (QCNW-B556WJZZ) for service.
3. Remove only SC1201 of the FFC for connection between Main unit (SC1201) and LCD panel, and connect the
extended cable (QCNW-A555WJZZ) for service.
4. Remove only SC105 of the FFC for connection between Main unit (SC105) and Operation unit (SC4201), and
connect the extended cable (QCNW-D444WJQZ) for service.
5. Remove only SC3601 of the FFC for connection between Sub unit (SC3601) and R/C, LED unit (SC4001), and
connect the extended cable (QCNW-D445WJQZ) for service.
6. Remove the PWB unit fixing screws (main unit : 2pcs, sub unit : 2pcs., inverter unit : 3pcs.)
3
SC1201 SC1202
CN1
1
Main PWB
Step Part No.
1 QCNW-A553WJZZ
2 QCNW-A556WJZZ
3 QCNW-A555WJZZ
4 QCNW-D444WJQZ
5 QCNW-D445WJQZ
Operation PWB
CN2 CN3
SC4201
4
2
SC105
SC1203
SC3601
5
SC4001
R/C, LED PWB
Extension Cable 30-pin Main (SC1203)-LCD Panel
Extension Cable 50-pin Main (SC1202)-LCD panel
Extension Cable 20-pin Main (SC1201)-LCD panel
Extension Cable 5-pin Operation (SC4201)-Main (SC105)
Extension Cable 8-pin R/C, LED (SC4001)-Sub (SC3601)
Sub PWB
(Side B)
Sub PWB
Description
11
LC-13SH1E
LC-15SH1E
Main PWB
(Side B)