Sharp LC-13SH1E Service Manual page 13

5. Adjustment
5-1. RF AGC adjustment
1) Feed the colour bar signal.
2) In Adjustment Mode, select the RF AGC AUTO ("OFF") and press the " RIGHT" cursor key to start the
adjustment.
3) Automatic adjustment is complete when it display "OK" is displayed.
4) RF AGC data will be in the range of 0-63. If "NOK" is displayed, adjustment failed.
SH1E Main Ver
Scaler Ver *.**.**
RF AGC AUTO
5-2. DCXO adjustment
1) Feed the colour bar signal.
2) In Adjustment Mode, select the DCXO AUTO ("OFF") and press " RIGHT" cursor key to start the adjustment.
3) Automatic adjustment is complete when "OK" is displayed. If "NOK" is displayed, adjustment failed.
SH1E Main Ver
Scaler Ver *.**.**
DCXO AUTO
5-3. Common bias adjustment
1) Select the EXT-Video input and without signal.
2) In Adjustment Mode, select the COM BIAS and vary the data until the contrast becomes the sharpest.
(Black looks most sinking.)
5-4. White balance adjustment
[A] White balance pre-adjustment
1) Feed the 100% white signal.
2) In Adjustment Mode, select the AWBSD ("OFF") and press the " RIGHT" cursor key to start the adjustment.
3) Automatic adjustment is complete when "OK" is displayed.
[B] White balance adjustment
Adjust "R CUTOFF2", "G CUTOFF2", "B CUTOFF2", "WB R GAIN", "WB G GAIN" and "WB B GAIN" in the
adjustment processing to obtain the same colour as the standard set.
6. Factory setting
6-1. Make the factory setting using the adjustment remote control.
Model
A3IK13/15SH1E
A3IK13/15SH1K
A3IK13/15SH1R
A3IK13/15SH1F
A3IK13/15SH1I
6-2. Different factory settings.
Model
A3IK13/15SH1E
A3IK13/15SH1K
A3IK13/15SH1R
A3IK13/15SH1F
A3IK13/15SH1I
*.**
RF AGC Auto adjustment complete
OK
38 RF AGC data (Example)
*.**
OK
DCXO Auto adjustment complete
DCXO data
**
Key Name
Shipment Setting 1 1000
Shipment Setting 2 1000
Shipment Setting 3 1000
Shipment Setting 4 1000
Shipment Setting 6 1000
Language Country
German Germany
English UK
Russian Russia
French France
Italian Italy
Remote Control Code
0011 1111 110
0000 1010 110
0110 1011 110
0100 1011 110
0000 1011 110
Color System Sound System
PAL
PAL
SECAM
SECAM
PAL
13
LC-13SH1E
LC-15SH1E
OSD Language Setting
German (00001 FEh)
English (00002 A8h)
Russian (00003 EBh)
French (00004 E9h)
Italian (00005 E8h)
B/G
I
D/K
L/L'
B/G