Operating Instructions - Kärcher K2.35 Operator's Manual

OPERATING INSTRUCTIONS

Step 1
Connect the high pressure hose to the unit's high
pressure outlet.
Step 3
Connect garden hose to unit's water inlet.
Step 5
Plug the power cord into the power outlet. Unlock
the lock of the trigger gun (A). Trigger the gun (B)
to eliminate trapped air, wait for a steady flow of
water to emerge from the spray nozzle.
Step 2
Insert the High/Low pressure nozzle into
the trigger gun. Press in against the spring
tension and twist into the locked position.
Step 4
Connect garden hose to the cold water
source and turn water on completely.
Step 6
Turn on the pressure washer (I).
NOTE: This unit is equipped with a
pressure switch. The motor only starts up
when the trigger on the gun is pulled.
The motor shuts off when the trigger is
released.
5