F_Panel; Azalia_Fp - Gigabyte GA-K8RS482M-FS-02 User Manual

8) F_PANEL (Front Panel Jumper)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis
front panel to the F_PANEL connector according to the pin assignment below.
HD (IDE Hard Disk Active LED)
RES (Reset Switch)
PW (Power Switch)
MSG(Message LED/Power/Sleep LED)
NC
9) AZALIA_FP (Front Audio Connector)
This connector is supported to connect HD(High Definition) Audio. Check the pin assignment
carefully while you connect the audio panel cable, incorrect connection between the cable and
connector will make the device unable to work or even damage it. For optional audio
panel cable, please contact your local dealer.
Message LED/
Power
Power/
Switch
Sleep LED
2
1
IDE Hard Disk
Active LED
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Open: Normal
Close: Reset Hardware System
Open: Normal
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
NC
HD Audio:
Pin No.
1
2
1
2
3
10
9
4
5
6
7
8
9
10
- 11 -
10
9
Reset Switch
Definition
MIC2_L
GND
MIC2_R
-ACZ_DET
Line2_R
FSENSE1
FAUDIO_JD
No Pin
LINE2_L
FSENSE2
Hardware Installation