9-Managing The Printer; Finding Advanced Networking And Administrator Information; Copying Printer Settings To Other Printers; Configuring Supply Notifications From The Embedded Web Server - Konica Minolta bizhub 3301P User Manual

9—Managing the printer
Finding advanced networking and administrator
information
This chapter covers basic administrative support tasks using the Embedded Web Server. For more
advanced system support tasks, see the Networking Guide on the Printer Driver and Documentations CD.

Copying printer settings to other printers

Note: This feature is available only in network printers.
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address
appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click the Copy Printer Settings.
3. To change the language, select a language from the drop-down menu, and then click Click here to
submit language.
4. Click Printer Settings.
5. Type the IP addresses of the source and target printers in their appropriate fields.
Note: If you want to add or remove a target printer, then click Add Target IP or Remove Target IP.
6. Click Copy Printer Settings.
Configuring supply notifications from the Embedded Web
Server
You can determine how you would like to be notified when supplies run nearly low, low, very low, or reach
their end-of-life by setting the selectable alerts.
Notes:
• Selectable alerts can be set on the toner cartridge and imaging unit.
• All selectable alerts can be set for nearly low, low, and very low supply conditions. Not all selectable
alerts can be set for the end-of-life supply condition. E-mail selectable alert is available for all supply
conditions.
• The percentage of estimated remaining supply that prompts the alert can be set on some supplies for
some supply conditions.
User's Guide
- 60 -