Problems When Using The Auto Mcacc Setup; The Input Setup Menu - Pioneer VSX-LX52 Operating Instructions Manual

Basic Setup

Problems when using the Auto MCACC Setup

If the room environment is not optimal for the Auto
MCACC Setup (too much background noise, echo off the
walls, obstacles blocking the speakers from the
microphone) the final settings may be incorrect. Check
for household appliances (air conditioner, fridge, fan,
etc.), that may be affecting the environment and switch
them off if necessary. If there are any instructions
showing in the front panel display, please follow them.
• Some older TVs may interfere with the operation of
the microphone. If this seems to be happening,
switch off the TV when doing the Auto MCACC Setup.

The Input Setup menu

You only need to make settings in the Input Setup menu
if you didn't hook up your digital equipment according to
the default settings (see Input function default and
possible settings on page 42). In this case, you need to
tell the receiver what equipment is hooked up to which
terminal so the buttons on the remote control
correspond to the components you've connected.
AUDIO
PARAMETER
RECEIVER SOURCE
LIST
TOP MENU
BAND
DVD BD DVR HDMI
PRESET
TV CD CD-R VIDEO
PTY
SEARCH
iPod USB TUNER INPUT SELECT
HOME
MENU
iPod CTRL
1 Switch on the receiver and your TV.
Use  RECEIVER to switch on.
2 Press RECEIVER on the remote control, then press
HOME MENU.
A Graphical User Interface (GUI) screen appears on your
TV. Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to
confirm and exit the current menu.
3 Select 'System Setup' from the HOME MENU.
4 Select 'Input Setup' from the System Setup menu.
4.SystemSetup
A/V RECEIVER
a.Manual SP Setup
b. Input Setup
c. OSD Language
d. Other Setup
Exit Return
Note
1 For high-definition video (using component video connections), or when digital video conversion is switched off (in Setting the Video options
on page 62), you must connect your TV to this receiver using the same type of video cable as you used to connect your video component.
VIDEO
TV/DTV MPX PQLS
PARAMETER
TUNE TOOLS
AUDIO INFO CH
T.EDIT
GUIDE DISP
RECEIVER
TV CTRL
ENTER PRESET
REMOTE
SETUP
RETURN
ZONE 2 ZONE 3
TUNE
MAIN
4b.Input Setup
A/V RECEIVER
Input : DVD
Input Name : Rename
Input Skip : OFF
Digital In : COAX-1
HDMI Input : - - -
Component In : Comp-1
12V Trigger1 : OFF
12V Trigger2 : OFF
Exit Finish
5 Select the input function that you want to set up.
The default names correspond with the names next to the
terminals on the rear panel (such as DVD or VIDEO)
which, in turn, correspond with the names on the remote
control.
6 Select the input(s) to which you've connected your
component.
For example, if your DVD player only has an optical
output, you will need to change the DVD input function's
Digital In setting from COAX-1 (default) to the optical
input you've connected it to. The numbering (OPT-1 to 3)
corresponds with the numbers beside the inputs on the
back of the receiver.
• If your component is connected via a component
video cable to an input terminal other than the
default, you must tell the receiver which input
terminal your component is connected to, or else you
may see the S-Video or composite video signals
instead of the component video signals.
7 When you're finished, proceed to the settings for
other inputs.
There are three optional settings in addition to the
assignment of the input jacks:
• Input Name – You can choose to rename the input
function for easier identification. Select Rename to
do so, or Default to return to the system default.
• Input Skip – When set to ON, that input is skipped
when selecting the input using INPUT SELECT or the
front panel INPUT SELECTOR dial. (DVD and other
inputs can be still be selected directly with the input
function buttons.)
• 12V Trigger1/2 – After connecting a component to
one of the 12 volt triggers (see Switching components
on and off using the 12 volt trigger on page 34), select
MAIN, ZONE 2, ZONE 3 or OFF for the corresponding
trigger setting to switch it on automatically along
with the (main or sub) zone specified.
4b.Input Setup
A/V RECEIVER
Input :
Input Name :
Input Skip :
Digital In :
HDMI Input :
Component In :
12V Trigger1 :
12V Trigger2 :
Exit
8 When you're finished, press RETURN.
You will return to the System Setup menu.
1
DVD
Rename
OFF
COAX-1
- - -
Comp-1
OFF
OFF
Finish
04
41
En