HP E201 User Manual page 20

3. Adjust the monitor's height to a comfortable position for your individual workstation. The monitor's top
bezel edge should not exceed a height that is parallel to your eye height. A monitor that is positioned
low and reclined may be more comfortable for users with corrective lenses. The monitor should be
repositioned as you adjust your working posture throughout the work day.
NOTE:
full-height position. To adjust the display head to full height, press down on the display head to unlock
it then pull up on the display head to raise it to the full-height position.
4. You can pivot the monitor from landscape to portrait orientation viewing to adapt to your application.
a. Adjust the monitor to full height position and tilt the monitor back to full tilt position (1).
b. Pivot the monitor clockwise 90° from landscape to portrait orientation (2).
CAUTION:
corner of the monitor panel will come in contact with the base and potentially cause damage to
the monitor.
If you are adding an optional speaker bar to the monitor, install it after pivoting the monitor. The
speaker bar will come in contact with the base when pivoting and potentially cause damage to the
monitor or speaker bar.
14 Chapter 3 Setting up the monitor
When the monitor is unfolded for the first time, the display head is locked from adjusting to a
If the monitor is not in full height and full tilt position when pivoting, the bottom right