Reference manual
Prints undefined characters
The first line is not completely
printed out at the top
Dots within characters are mis-
sing
PRINT
BACK
1. Check that the interface plug is correctly connected to the computer and
to the printer.
2. Check that the proper emulation and the correct character set (country,
CG table or character set) is selected in the Setup menu.
3. Check the length of the interface cable (see
Check the function FormAdj. Refer to the chapter
1. Check whether the ribbon is damaged, if necessary replace it (see the
section
Changing the ribbon cassette
2. Set the correct printhead gap.
3. Check whether the platen is damaged.
4. Check whether the printhead is damaged.
In case of points 3 or 4, please contact your dealer.
Please use original ribbon cassettes only.
Troubleshooting
Technical specifications
The
menu.
).
?
).
QUIT
97