Battery Installation And Charging; Battery Installation - AT&T EL51103 User Manual

Getting started

Battery installation and charging

Battery installation

Install the battery, as shown below.
1. Plug the battery connector securely into the socket inside the handset
battery compartment, matching the color-coded label. Insert the supplied
battery with the label THIS SIDE UP facing up, as indicated.
2. Align the cover flat against the battery compartment, then slide it upwards
until it clicks into place.
CHARGE light
ImPoRTAnT InFoRmATIon:
Use only the supplied rechargeable battery or replacement battery (model BT162342/
BT262342). To order, visit our website at
1 (800) 222-3111
3. Charge the handset by placing it face up
in the telephone base or charger. The
CHARGE light is on when charging.
To replace the battery, press the tab and slide
the battery compartment cover downwards.
Lift out the old battery and disconnect it from
the handset. Follow the instructions to install
and charge the new battery.
www.telephones.att.com
1 (866) 288-4268
. In Canada, dial
7
or call
.