Telephone operation
Handset locator
You can use the handset locator feature to find
misplaced handsets.
To start the paging tone:
•
Press
/HAnDSET loCAToR on the telephone
base to start the paging tone on all handsets for
60 seconds.
To stop the paging tone:
•
Press
PHonE/
oFF
/
CAnCEl
the handset(s).
-oR-
/HAnDSET loCAToR on the
•
Press
telephone base.
-oR-
•
Place the handset in the telephone base or charger.
notes:
•
If you press mUTE/
tone continues on the other handsets.
•
If a handset is on a call (intercom call or outside call), or out of range, that handset does not
beep when paged.
Web address
You can use the web address feature to view the AT&T website address.
1.
Press mEnU/
2.
Press
or
CID
press
/SElECT. The screen shows the AT&T
mEnU
Website address.
,
/SPEAKER,
FlASH
or any dialing key (0-9,
on a handset, the ringer of that handset is silenced but the paging
DElETE
in idle mode.
SElECT
to scroll to Web address, then
DIR
or #) on
26
www.telephones.
ECO
att.com
ECO