Mix down/Bounce
Using a mastering effect
Use a mastering algorithm as an insert effect on the master track that affects just the mix down.
Insert an INSERT EFFECT before
the [MASTER] fader.
1
Effect ON/OFF switch
C L E A N < I N 1 >
N o . 0 0 : S t a n d a r d
2
MASTERING
Select
M A S T E R I N G
< I N 1 / 2 >
N o . 0 0 : P l u s A l f a
3
Press[
N o . 0 0 : P l u s
A l f a
> E D I T
4
Select
>INPUT
S OURCE
N o . 0 0 : P l u s
A l f a
> I N P U T
S O U R C E
Press [ENTER].
I n p u t
S o u r c e
I N P U T 1
5
MASTER.
Select
I n p u t
S o u r c e
M A S T E R
Press [ENTER].
N o . 0 0 : P l u s
A l f a
> E D I T
6
Press[
M A S T E R I N G
< M A S T E R >
N o . 0 0 : P l u s A l f a
41
Press [INSERT EFFECT].
If "INSERT EFFECT Off" is displayed,
press [ENTER].
Change algorithms
.
Change menus
].
Change menus
.
Change input
Change menus
].
7
Select the patch.
M A S T E R I N G
< M A S T E R >
N o . 0 3 : D i s c o M s t
Audition the patches while
listening to the tracks playback,
and then select one.
8
Press [EXIT].
P R J 0 0 1
0 0
0 0 0 : 0 0 : 0 0 0
NOTE
fader, you cannot also use the INSERT EFFECT
on track inputs.
because of the MASTERING EFFECT, check
the sound of playback on the track and adjust
it by lowering all the faders. (If a track sound is
distorted, adjust that track.)
algorithms. If you set another algorithm, the insert
position changes to the inputs.
HINT
can use the MASTERING EFFECT processing on
the stereo mix.
Recording signal flow to the master track
Change patch
< M A S T E R >