Mix Down/Bounce - Zoom R16 Operation Manual

Mix down/Bounce

Combine multiple tracks into 1~2 tracks
Combine multiple tracks into one monaural or stereo file.
Using BOUNCE, this creates a new file in the same project.
Settings for the bounced tracks
PROJECT>REC SETTING>BOUNCE
Start from the top screen.
1
Press [PROJECT].
2
Select >REC S ETTING
P R O J E C T
> R E C S E T T I N G
Press [ENTER].
3
Select >BOUNCE
R E C S E T T I N G
> B O U N C E
Press [ENTER].
Set whether the track that is
overwritten by the bounce
recording is muted or not.
4
Select >REC T RACK: P lay
B O U N C E
R E C T R A C K : P l a y
5
Press [ENTER].
Mute: Set the bounce destination track to
be silent (initial setting).
Play: Set the bounce destination track to
play and be included in the bounce.
NOTE
REDO] key.
PAN of the odd number track to L 100 and the
even number track to R 100.
Ref: Mix down
39
.
Change
menus
.
Change
menus
.
P.40, 42
Bounce (preparation)
1
Set tracks that you want to bounce
to playback.
Press the [PLAY/MUTE/
REC] 1-2 times until the
green light turns on.
Green light on: playback enabled (PLAY)
2
Select destination track(s) for the
bounce.
Press [PLAY/MUTE/REC]
1-2 times until the red light
turns on.
Red light on: record enabled [REC]
HINT
several tracks and files together into one stereo
or monaural file. This is also called "ping-pong
recording."
bounce is being recorded to, set "REC TRACK"
to "Play" in the BOUNCE Menu as described at
Step 4.
created in the same project.
track, the recorded signals are mixed to
monaural. If set to a stereo link track pair, the
recorded signals are mixed to stereo.